Facilities
PICKLING LINES :
Hydrochloric acid is used as the pickling medium in the with modern practice.
|
CONTINUOUS
PICKLING LINE 1250 MM WIDTH |
PUSH PULL PICKLING LINE 1250 MM WIDTH @ 90 MPM | |
| MAKE | MAGADH PRECISION, INDIA | Magadh precision, India |
| STRIP THICKNESS | 1.6-3.0 MM | 1.5-3.0 MM |
| STRIP WIDTH | 750-1250 MM | 600-1250 MM |
| LINE SPEED | 90 MPM (Max) | 140 MPM (Max) |
| PICKLING MEDIUM | 15-20
% HCL Acid 650 C-700 C |
15-20
% HCL Acid 650 C-700 C |
| PRODUCTION CAPACITY | 1,00,000 TONS PER ANNUM | 4,00,000 TONS PER ANNUM |
| COIL WEIGHT | 25 MT MAX | 20 MT MAX |
COLD
ROLLING MILL :
The Company has four CR
Mills equipped with isotope gauge on both side: and automatic gauge control
system.
|
4 HI
REVERSING COLD ROLLING MILL 1250 MM WIDTH |
4
HI REVERSING COLD ROLLING MILL 1020 MM WIDTH @ 500 MPM |
6 HI
REVERSING COLD ROLLING MILL 1250 MM WIDTH @ 300 MPM |
|
| MAKE | ROBERTSON | DEMAG, GERMANY | FLAT PRODUCT, MUMBAI |
| NO OF MILL | 1 | 1 | 2 |
| INPUT THICKNESS | 1.6-3.0 MM | 1.6-3.0 MM | 3.2 MM (MAX) |
| ONPUT THICKNESS | 0.16-0.6 MM | 0.15-0.7 MM | 0.12 MM (MIN) |
| LINE SPEED | 300 MPM (Max) | 500 MPM (Max) | 0-500-1200 MPM (MAX) |
| COIL WEIGHT | 15 TON (MAX) | 20 TON (MAX) | 22 TON (MAX) |
| PRODUCTION CAPACITY | 50000 TONS / YEAR FOR THE INPUT STRIP 2.0 MM X 1020 MM X 10 TONS TO 0.25 MM | 60000 TONS / YEAR FOR THE INPUT STRIP 0.20 MM TO 2.0 MM X 1020 MM X 10 TONS | 120,0000 TONS / YEAR FOR THE INPUT STRIP 2 MM X 914 MM X 18 TONS, AND OUTPUT THICKNESS IS 0.20 MM, WORKING HOURS 6500 HRS/ YEAR |
| WIDTH | 700-1250 MM | 600-1020 MM | 600-1020 MM |
REWINDING
CUM EDGE TRIMMING LINE :
These are used to trim
the mill edges from the cold rolled strip before processing to galvanizing
line.
|
REWINDING CUM EDGE TRIMMING LINE |
REWINDING CUM EDGE TRIMMING LINE | |
| MAKE | DEMAG, GERMANY | FLAT PRODUCT, MUMBAI |
| NO OF LINE | 2 | 2 |
| STRIP THICKNESS | 0.18-0.60 MM | 0.10-0.50 MM |
| STRIP WIDTH | 700-1250 MM | 600-1020 MM |
| LINE SPEED | 0-200 MPM (Max) | 500 MPM (Max) |
| COIL WEIGHT | 15 TON (MAX) | 22 TON MAX |
| PRODUCTION CAPACITY | 15 TON PER HOUR FOR REF STRIP 0.20 MM X 920 MM | 18 TON PER HOUR FOR REF STRIP 0.12 MM X 920 MM |
CONTINUOUS
HOT DIP GALVANISING LINE :
Each line is
incorporated with two un-collar, a strip welder, entry and exit vertical
accumulator, strio degreasing, horizontal electrical furnace, zip pot with air
knife, chromating section and staggered winding at the re-coller. The
protective atmosphere generator is capable of step less control between 25 and
75% hydrogen. We are monitoring zinc coating through X-ray Guage Meter.
|
CONTINUOUS
HOT DIP GALVANISING LINE
1250 MM WIDTH |
CONTINUOUS
HOT DIP GALVANISING LINE
1000 MM WIDTH @ 150 MPM |
|
| MAKE | MAGADH PRECISION, INDIA | Magadh precision, India |
| NO OF LINE | 1 | 3 |
| STRIP THICKNESS | 0.15-0.70 MM | 0.14-0.63 MM |
| STRIP WIDTH | 700-1250 MM | 650-1000 MM |
| LINE SPEED | 100 MPM (Max) | 150 MPM (Max) |
| PHEATING SOAKING FURNACE | HORIZONTAL ELECTRICAL HEATER TYPE | HORIZONTAL ELECTRICAL HEATER TYPE |
| PRODUCTION CAPACITY (EACH LINE) | 10 TON PER HOUR FOR REF STRIP 0.27 MM X 880 MM | 15 TON PER HOUR FOR REF STRIP 0.27 MM X 880 MM |
CUT-TO-LENGTH LINES :
The company
faciliates 9 Nos of cut-to-length machines to provide sheets of various
width as per customers requirements.
CORRUGATION LINES
MACHINES :
The company faciliates 10 Nos of corrugation machines to provide sheets
of various width as per customers requirements.
